Hubs: Difference between revisions
Telcredstaff (talk | contribs) No edit summary |
Telcredstaff (talk | contribs) No edit summary |
||
| Line 4: | Line 4: | ||
[[File:Create_sv_hub.png|Create hub]] |
[[File:Create_sv_hub.png|Create hub]] |
||
When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify the IP address and device address of the hub (the latter is a SmartIntego internal address that can be found using the SmartIntego software tool). |
|||
Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego). |
|||
Revision as of 13:11, 1 November 2018
In order to use wireless locks from SimonsVoss SmartIntego or Assa Aperio it is necessary to first connect the doors to a hub, which is later connected to the relevant controller (using the controller settings). One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.
When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify the IP address and device address of the hub (the latter is a SmartIntego internal address that can be found using the SmartIntego software tool).
Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).