Hubs: Difference between revisions

From Telcred documentation
Jump to navigation Jump to search
No edit summary
No edit summary
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
In order to use wireless locks from [[Assa Aperio]] it is necessary to first connect the doors to a ''hub'', which is later connected to the relevant controller (using the [[A1001_settings#Door_hub|controller settings]]).
In order to use wireless locks from [[SimonsVoss SmartIntego]] or [[Assa Aperio]] it is necessary to first connect the doors to a ''hub''. One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.


Every hub has a managing controller. For SmartIntego, a controller can manage multiple hubs and the controller is specified on the hub page. For Assa Aperio, a controller can only manage one hub, and the hub is specified in the [[Controllers|controller settings]].


[[File:Create_hub.png|Create hub]]


[[File:Create_sv_hub.png|border|Create hub]]



One Assa Aperio hub can connect up to 8 doors.
When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify:
* the IP address of the hub (which is used by the controller to find the hub so it should never change)
* the device address of the hub (a SmartIntego internal address that can be found using the SmartIntego software tool)
* the hub's managing controller

Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).

Latest revision as of 17:22, 13 October 2021

In order to use wireless locks from SimonsVoss SmartIntego or Assa Aperio it is necessary to first connect the doors to a hub. One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.

Every hub has a managing controller. For SmartIntego, a controller can manage multiple hubs and the controller is specified on the hub page. For Assa Aperio, a controller can only manage one hub, and the hub is specified in the controller settings.


Create hub


When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify:

  • the IP address of the hub (which is used by the controller to find the hub so it should never change)
  • the device address of the hub (a SmartIntego internal address that can be found using the SmartIntego software tool)
  • the hub's managing controller

Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).