Hubs: Difference between revisions

From Telcred documentation
Jump to navigation Jump to search
(Created page with "In order to use wireless locks from Assa Aperio it is necessary to first connect the doors to a ''hub'', which is later connected to the relevant controller (using the T...")
 
No edit summary
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
In order to use wireless locks from [[Assa Aperio]] it is necessary to first connect the doors to a ''hub'', which is later connected to the relevant controller (using the [[Tabs#Controllers|controller settings]]).
In order to use wireless locks from [[SimonsVoss SmartIntego]] or [[Assa Aperio]] it is necessary to first connect the doors to a ''hub''. One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.

Every hub has a managing controller. For SmartIntego, a controller can manage multiple hubs and the controller is specified on the hub page. For Assa Aperio, a controller can only manage one hub, and the hub is specified in the [[Controllers|controller settings]].


[[File:Create_sv_hub.png|border|Create hub]]


When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify:
* the IP address of the hub (which is used by the controller to find the hub so it should never change)
* the device address of the hub (a SmartIntego internal address that can be found using the SmartIntego software tool)
* the hub's managing controller

Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).

Latest revision as of 17:22, 13 October 2021

In order to use wireless locks from SimonsVoss SmartIntego or Assa Aperio it is necessary to first connect the doors to a hub. One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.

Every hub has a managing controller. For SmartIntego, a controller can manage multiple hubs and the controller is specified on the hub page. For Assa Aperio, a controller can only manage one hub, and the hub is specified in the controller settings.


Create hub


When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify:

  • the IP address of the hub (which is used by the controller to find the hub so it should never change)
  • the device address of the hub (a SmartIntego internal address that can be found using the SmartIntego software tool)
  • the hub's managing controller

Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).