Hubs: Difference between revisions
Jump to navigation
Jump to search
Telcredstaff (talk | contribs) No edit summary |
Telcredstaff (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
In order to use wireless locks from [[SimonsVoss SmartIntego]] or [[Assa Aperio]] it is necessary to first connect the doors to a ''hub'', which is later connected to |
In order to use wireless locks from [[SimonsVoss SmartIntego]] or [[Assa Aperio]] it is necessary to first connect the doors to a ''hub'', which is later connected to its managing controller. |
||
(using the [[Controllers|controller settings]]). One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors. |
|||
Revision as of 15:41, 6 October 2020
In order to use wireless locks from SimonsVoss SmartIntego or Assa Aperio it is necessary to first connect the doors to a hub, which is later connected to its managing controller.
(using the controller settings). One SmartIntego hub can connect up to 16 doors and one Assa Aperio hub can connect up to 8 doors.
When creating a new hub, first give the hub a name and select the type (Aperio or SmartIntego).For SmartIntego hubs, it is necessary to specify the IP address and device address of the hub (the latter is a SmartIntego internal address that can be found using the SmartIntego software tool).
Then add the door(s) to the hub. When adding a door, first select the door from the drop down menu, and then enter the hardware settings for the actual wireless lock (these will differ a bit depending on if it is Assa Aperio or SmartIntego).