Door configs: Difference between revisions
Jump to navigation
Jump to search
Telcredstaff (talk | contribs) No edit summary |
Telcredstaff (talk | contribs) |
||
| Line 3: | Line 3: | ||
[[File:Door-config.png|Door config details]] |
[[File:Door-config.png|Door config details]] |
||
To create a new door in Telcred Access Manager, it is first necessary to create a door config. The door config contains the door's name |
To create a new door in Telcred Access Manager, it is first necessary to create a door config. The door config contains the door's name and some technical parameters, which are typically set by the installer/integrator: |
||
* ''Name''. Should be something meaningful to both the administrator and the end users. |
* ''Name''. Should be something meaningful to both the administrator and the end users. |
||
| Line 11: | Line 11: | ||
* ''Pre-alarm''. The number of seconds before ''Open too long time'' that the reader will warn the user to close the door. |
* ''Pre-alarm''. The number of seconds before ''Open too long time'' that the reader will warn the user to close the door. |
||
* ''Suppress forced open''. With this setting, no ''Door forced open'' alerts will be generated. This can be relevant where the door is equipped and configured with a door monitor but opened manually from the inside (as opposed to with a REX device). Note: If the door has a reader, the reader will still indicate ''Door forced open'' even though it is ignored in Telcred Access Manager. |
* ''Suppress forced open''. With this setting, no ''Door forced open'' alerts will be generated. This can be relevant where the door is equipped and configured with a door monitor but opened manually from the inside (as opposed to with a REX device). Note: If the door has a reader, the reader will still indicate ''Door forced open'' even though it is ignored in Telcred Access Manager. |
||
After having created a door config, it can be linked to the right controller on the [[Controllers|controller]] page. |
|||
Revision as of 10:33, 7 September 2020
Settings
To create a new door in Telcred Access Manager, it is first necessary to create a door config. The door config contains the door's name and some technical parameters, which are typically set by the installer/integrator:
- Name. Should be something meaningful to both the administrator and the end users.
- Directional. Directional doors are explained here. The default is no.
- Access time. This is the time the lock stays unlocked after a credential has been accepted by the reader.
- Open too long alarm. After this time the alert Door left open will be generated and the reader will indicate an alarm.
- Pre-alarm. The number of seconds before Open too long time that the reader will warn the user to close the door.
- Suppress forced open. With this setting, no Door forced open alerts will be generated. This can be relevant where the door is equipped and configured with a door monitor but opened manually from the inside (as opposed to with a REX device). Note: If the door has a reader, the reader will still indicate Door forced open even though it is ignored in Telcred Access Manager.
After having created a door config, it can be linked to the right controller on the controller page.